Features a nickel-plated steel jaw contact material with a standard jaw opening of 516 (8 mm), and accepts standard 0.08 (2 mm) pin tip sized test probes.

Ideal for installing and troubleshooting field buses and motors.

Includes SCC120 kit (software, communications cable and durable carry case).

This instrument integrates an oscilloscope, multimeter, and high-speed recorder.

Additionally, it comes with a current clamp and the FlukeView software.

The ScopeMeter performs a bus health test on industrial buses, for example, which are rapidly becoming a headache for Service, Maintenance and Installation (SMI) engineers.

The test quickly determines whether the bus is working and if not, helps to identify the cause.

The rugged ScopeMeter works with many Industrial Networks including AS-I bus, CAN-bus, Profibus, Foundation Fieldbus and Ethernet.

The ScopeMeters are 600 V CAT III safety certified for machinery, instrumentation, control and power systems.

The new Fluke 125 has all the features of the successful Fluke 123 and Fluke 124 ScopeMeters and, in addition to the bus health test, it also carries out effective (Vpwm) voltage measurements of motor drive output, and has 0.01 ohm resolution on the 50 Ohms range for testing motor windings.

The instrument continuously acquires the bus signal and compares parameters to official specifications.

It displays bus speed and measures signal quality with good or bad indications for parameters like rise- and fall-time, amplitude, bias level, pulse width and distortion.

That includes the important 3rd and 5th harmonics, which may be the cause of overheating in neutral wire or motor, as well as flat-topping of the mains voltage from non-linear loads like SMPS units.

The wide frequency range covers railway (16.66 Hz) and airplane systems (400 Hz) applications.

Unlike PQ analyzers, the instrument is not restricted to 5060 Hz, and can measure power at the output of motor drives and frequency converters.

For electrical and combustion engines, the 125 can indicate revolutions-per-minute (rpm), and can be set up for 1 or 2 rotations per pulse, or 1 rotation per 2 or 4 pulses.

A 50-ohm resistance range brings excellent 0.01-ohm resolution for checking motor windings and other wiring.

The 123 has a 20 MHz bandwidth, while the 124 is a 40 MHz bandwidth instrument that performs more advanced measurements.

The 125 is also a 40 MHz instrument but includes features for testing Field Bus and motors.

All incorporate Flukes unique Connect-and-View to recognize signal patterns, and automatically set up correct triggering.

The Fluke 125S adds FlukeView software, carrying case and OC4USB cable.

Gather valuable measurement data and enable cursor measurements to.

They are heat and cold resistant, with a safety rating of CAT II 1000 V, 10 A.

The extra strength probe tips to provide a long service life and the test leads have a CAT III 300 V, 3 A rating, UL listed.

Additionally, it features a bright white LED and fits between the modular test probe and test lead.

Fluke Scopemeter Software Download